Back end cover/Protector.
The arms line up with the light cutouts on teh side paniers.
Also on here, will go the rear light and Number Plate.
Still some work to be done on it, but if you look back thru earlier Photo Albums This Year, you will see it Mock Fitted.
Toolbox, and lid, all bolts to the frame and to the base of the top box.
We still have some work to do on this, but just fiddly things :) :)
Once done, will need to make up a toolkit :) :)
Side Pannier frame Holders.
Again some very minor work to do, and some more strengthening to be done.
2nd Fuel Tank & Battery Box.
All pressure tested, just needs sealing (altho no leaks, just my preference :) :) ).
Kev finds the Klicktronic, and we discuss were its gonna be fitted etc :) :)
Gotta admit it does look nice, Filler cap position, is a compromise, as were I planned for it to go, would mean Kev would have to remove some frame strengtheners.
Access, will be via the seat, but we have yet to finalise the details.
As we need everything bolted into place.
Air Filters fitted. Keeping the much out of the carbs.
Altho I plan to have them stripped and ultrasonically cleaned, they also have some drilling and adjustments to be done inside.
Main Petrol Tank ready for the hard work prepping for spraying.
I am hoping to get the tank over to Heidi at Piggassio next week, if all goes to plan :) :)
Final position to the Millimetre is yet to be finalised, as will need the console fitted to handle bars, to make sure we have all round clearance, as it turns with the handle bars.
The ignition coils need to be lowered a bit for clearance :) :)
View from the rear :) :)
one word
AWESOME !
View from Front :) :)
Can only do close up as front ends so long :) :)
That's it for todays update. Kev n Me have discussed a lot today and should move forward quiet quickly.
Next visit penned in for about 4 weeks, for Lynne & Mine fittings :) :)
Add comment
Comments